 |
|
|
|
 |
|
HCXtreme™ Medical Optical Fiber Product Line
 HCXtreme fibers are optimized to enhance performance in laser power delivery under tight bend. These four multimode step-index fibers are designed for use with higher power lasers in medical applications such as Lithotripsy, BPH treatment, and laser-based cosmetic procedures.
Advances in laser technology and the increasing flexibility of the scopes used to introduce many of these fibers make it critical that fibers can handle higher energy at extreme bends.
 Available in core diameters of
272 µm, 365 µm, 550 µm, and
940 µm, HCXtreme fibers are coated with a fluoroacrylate coating that is similar to the coating used in the HCS® optical fiber product line. This coating has a lower refractive index than that of silica, so it also acts a second cladding that will guide light in the silica cladding of the fiber. The active performance of these fibers depends on the launch condition and the type of laser used.
Studies by OFS demonstrate that fibers with a low bend loss and optimized low-index coating are better suited for handling higher energy at extreme bends. The combination of a low bend loss design and optimized coating that has an increased laser-induced damage threshold has been shown to increase the reliability of fiber under power and tight bends.
Download Spec Sheets
HCXtreme Technology - Press Release
ISO 13485 Certification - Press Release
White Paper
FiberWire Article
Optical Fiber Solutions
for Medical Devices - Brochure
|
|
|
|
Avioptics
Avioptics harsh environment cable optimizes high-performance aircraft and military vehicle applications. The cable design is based on 200 µm fibers and adds coating and strength members especially for the corrosive environments encountered on aircraft, including jet fuel, oil. Solvents, and hydrolytic liquids.
AquaLink
AquaLink coating is our newest defense against water in outdoor cabling applications.
FlightGuide
The FlightGuide family of aerospace fibers and cables offers high temperature and strength in graded-index fiber-based constructions. Multiple coating and cabling layers specialize the cables for military and aerospace use. Some FlightGuide fibers are available sold separately.
HCS
Hard Clad Silica (HCS) was invented by OFS scientists and now serves as the industry standard cladding material for optical glass fibers. HCS cladding imparts unusual strength to fiber and makes it easy to crimp and cleave connectors directly to the fiber using a hand tool in the field instead of more complex epoxy/polish methods.
OASiX
Optical Amplifier Simulation Software from OFS, OASiX is packaged with erbium-doped fibers sold for use in EDFAs. This software and graphical interface allows the designer to plug in modeling parameters shipped with the fiber and begin on-screen simulations. This reduces design time by predicting the performance of EDFA systems including optical components such as filters, isolators, and reflectors.
ST
This connector type features a bayonet-style nut and is commonly used in telecommunications applications.
TruePhase
TruePhase is the name to remember for all of OFS’s non-doped polarization maintaining fibers. These are single mode fibers optimized for different wavelengths and cladding size requirements.
V-System
This easy-to-use connectorization system simply plugs in with a reassuring click. It is available for simplex cables, or with a duplex latch housing for connectorizing zipcord. Connectorizing HCS coated fibers with V-System connectors takes less than 2 minutes per end when using the compatible OFS crimp and cleave kit.
ClearLite
One of the most complete, diverse lines of single-mode optical fiber you can find, ClearLite encompasses several families of photonic fibers, each optimized for different applications: 980, 1310 & 1550, Micro, Specialty Coated, Short Wavelength, and Polarization-Maintaining.
GyroSil
Designed specifically for gyroscopes and similar navigational instrumentation, GyroSil singlemode fiber has a small NA of 0.17 and reduced 80 µm cladding diameter to accommodate the tight bend radii and coiling designs inherent in gyroscopic and sensor applications.
PYROCOAT
PYROCOAT polyimide is our premier fiber coating for high-temperature applications. In recent years, we have further refined the polyimide properties to create new versions of PYROCOAT optimized for steam or chemical resistance. When applied over a hermetic carbon layer, it provides the best protection in the industry against the harshest environments.
UltraSil
Known in the medical industry for years for its ultra low water peak useful for high-power delivery, our UltraSil fibers are made from unique preforms that deliver both low OH and one of the highest NAs achievable with a silica cladding. These fibers are also finding new application in sensing when further coated with high-temperature polyimide.
Specification Sheet not yet available. Please contact our facility in Somerset, NJ, for more detail.
